The Poem Epic Of Gilgamesh - 891 Words

The poem Epic of Gilgamesh highlights the complexand important roles of women in society long before notions of feminism became prevalent. This poem depicts not only the intellectual side of women but also solidifies them as beautiful, seductive, and powerful beings, who on a number of occasions evidence their equality and sometimes superiority to man. Take Shamhat for instance, she was a beautiful temple priestess, who was used to seduce the beast Enkidu, with her beauty and charm. So Gilgamesh replied: Go set a trap; take back with you a fine lover, Shamhat, the sacred temple priestess who might let him see what charm and force a woman has. (The Epic of Gilgamesh I p. 7) Gilgamesh summoned Shamhat to seduce the beast Enkidu knowing that if she showeredEnkidu with her loins, it would humanize him and effectively ostracize him from the beasts with which he was accustomed to roaming. Similarly, in a popular biblical story, Eve seduced Adam into eating the forbidden fruit from the tree of life after God had warned him not to. Thereafter, Adam, Eve and their progeny were forever banned from the Garden of Eden. After Enkidu’s intimate relationship with Shamhat, the beasts he had previously roamed with, exiled him.Enkidu returned to the herds but the beasts fled from him in haste. They stampeded away from his new self. He could n o longer race as he had once, legs soft now and ankles stiff. The beasts left him behind and he grew sad that he could no longer speed with them.Show MoreRelatedThe Epic of Gilgamesh Poem1357 Words   |  6 PagesIn the epic poem titled The Epic of Gilgamesh, Gilgamesh was a king who ruled over the Sumerian city of Uruk around 2600 B.C. Gilgamesh was a very powerful and strong king, but he realized that he must use his power to help the people of Uruk. He is two-thirds god and one third human, which makes him realize that he must reconcile with the fact that he will eventually face death. He realizes that he will not reach full immortality and needs to be satisfied with his responsibilities over his peopleRead MoreThe Epic Poem Gilgamesh 1748 Words   |  7 PagesThe Epic poem Gilgamesh dates back to approximately 3000 B.C., yet it is still widely popular in the modern day 21st century, as are the themes and messages the poem may have tried to express. The transformation of Gi lgamesh, or perhaps whether or not Gilgamesh actually transformed, is a topic of debate relating to this piece. Dr. Micah Sadigh contends that Gilgamesh conveys the message of existentialism, which is explored in the works of famous philosophers such as Kierkegaard, Buber, and HeideggerRead MoreAnalysis Of The Poem Epic Of Gilgamesh 2135 Words   |  9 Pages2100. In Mesopotamia, around 1300 B.C.E to 1000 B.C.E, Old Babylonians edited Epic of Gilgamesh, a poem describes how did Gilgamesh, the king of Uruk, try to find the everlasting life. This literature means a lot in history not only because it is almost the earliest written documents, but also because it reflects the worldview about Mesopotamia. For instance, Gods in this poem are pictured as terrible and selfish. Just like Mesopotamia, every ancient region had its own beliefRead MoreGender Roles During The Epic Of Gilgamesh An Epic Poem 939 Words   |  4 PagesBrandon Olmos April 4, 2017 Gender Roles In Gilgamesh, an epic poem, gender roles play a large role in the plot line. Even female goddesses had some key roles through this ancient epic. They might not have necessarily had the same strengths and duties to their male counterparts, but their roles were substantial. Even though the main characters in this epic, Enkidu and Gilgamesh, are male, women still had major roles in their tale. In the story of Ruth, Naomi and her mother-in-law defy genderRead MoreCivilizations and Heroism in the Epic Poems of Gilgamesh and Beowulf624 Words   |  3 Pagescivilizations. Heroes represent the principles and ideals associated with the varying morals of each individual society. The literature of Mesopotamia and Western Europe is a prime example of this. Beowulf, an Anglo-Germanic tale and The Epic of Gilgamesh, of the Sumerians, demonstrate perfectly, the ability of civilizations to convey the values and customs of their society through their literature. The setting for Beowulf is Scandinavia, before the time Christianity had spread its course.Read MoreBeowulf And The Epic Of Gilgamesh1667 Words   |  7 Pagesthe most widely known epic poems of their time were Beowulf and The Epic of Gilgamesh. Both Beowulf and Gilgamesh embody traits known exclusively of a hero. The poem of Beowulf and The Epic Gilgamesh both showcase the characteristics required of being an epic, in that they include a hero on a quest performing valorous deeds in an elevated style, while being protected by supernatural forces. The epic poem, Beowulf was based in the country of Denmark, while The Epic of Gilgamesh was based in a regionRead More The Epic of Gilgamesh is Truely an Epic Essay1690 Words   |  7 PagesThe Epic of Gilgamesh is Truely an Epic An epic is an extended narrative poem in elevated or dignified language, celebrating the feats of a legendary or traditional hero.  Ã‚   The main characteristics of an epic as a literary genre is that it is a long poem that tells a story, it contains an epic hero, its hero searches for immortality (but doesnt find it physically, only through fame), gods or other supernatural beings are interested and involved, and it delivers an historical message.  Read MoreThe Battle Of The Epic Of Gilgamesh931 Words   |  4 Pagesthe story of Gilgamesh and Enkidu partaking in their adventure to the edge of the Cedar Forest, and their encounter with a guard, an enemy. Throughout this battle, Gilgamesh loses faith in the couples ability to defeat the guard but is ultimately talked back into his heroic mindset by The Gods. In column VI, having just defeated the guard, Enkidu then finds himself in a similar situation to Gilgamesh, whereby he doubts their ability to defeat Humbaba, and it co mes down to Gilgamesh, and his leadershipRead MoreAnalysis Of The Epic Of Gilgamesh 903 Words   |  4 Pagesquote than the epic. Epics in media are presented with high stakes, memorable heroes, and thought-provoking messages. They originated in preliterate societies and among the first epics is the ancient Mesopotamian poem called â€Å"The Epic of Gilgamesh†. Written during the Third Dynasty of Ur, â€Å"Gilgamesh† tells the adventures of the eponymous king as he befriends an intended rival created by a goddess, slays monsters, and embarks a personal and perilous quest for eternal life. The poem is widely consideredRead MoreAnalysis Of The Epic Of Gilgamesh And Odyssey Essay1548 Words   |  7 Pagesmisogyny into stone. There are some exceptional cases in the famous epic poems, the Epic of Gilgamesh of the Sumerians and Akkadians and the Odyssey from Homer of the Greeks. We all can agree that these epic poems or at most the authors did not view women with our modern perspective – equality among gender. However, we cannot deny that female characters helped set the path of the epic heroes’ journey to their goals. In these epic poems, women are portrayed as figures and themes of knowledge, motherhood

Prevention Of Sexually Transmitted Diseases And Sex...

Prevention of Sexually Transmitted Diseases and Sex Education among the Teenagers Health Promotion Health is a significant characteristic of human right that individuals require to handle with caution. Exactly how healthy individuals are trained and know the effect of behaviors, which can jeopardies, the health of an individual, create less pressure and easy work for their caregiver to deal with and aids in the health promotion. Current studies illustrate the individual’s well-being is significantly affected by the parents, families and friends practices. For example, a juvenile can be exposed or engaging in sex at the early stage of life, through his/her parents, friends, or colleagues without knowing the consequence of the health†¦show more content†¦Primary Prevention Primary prevention is the initial and the first level of health care, which is aimed and designed to inhibit or prevent the incidence of illness and to promote health. HealthyPeople2020 goals and objectives emphasized on the primary prevention in order to promote individual healthy living, healthy communities and healthy nation. Primary prevention prevents individuals from diseases by involving the caregivers to go into diverse populaces to teach and educate people, families and communities in different ways that can aids how to live a hale and hearty life. Health personnel generally educate individuals about protective measure that can be adopted in order to prevent them from developing any disease condition and to live a healthy life to their full prospect. An individual that is free of any illness and living a healthy life, not only help him/herself, but contributing to the growth and development of that community or the nation. Epidemiological Rationale Sexually transmitted disease (STD) is a term used to refer to more than 20 diverse of infections that are transmitted through interchange of semen, blood, and other body fluids; or through direct contact with the infected body areas of an individual with STDs. STDs are also known as venereal diseases (Gale Encyclopedia of Medicine, 2008). STDs are

Divorce bill in the philippines free essay sample

Divorce or dissolution of marriage is the ending of a marriage before the death of either spouse. Divorce is illegal in the Philippines and the Catholic church would like to see it remain that way, but many citizens appear to be tired of Catholic prelates assuming the authority to dictate civil laws. Thus, a bill that would legalize divorce is moving through the government. BUT I JUST WANT TO CLARIFY THAT ONE OF THE PARAMETERS OF THIS DEBATE IS WE WILL NOT INCLUDE RELIGIOUS CONOTATION. In this debate, MUSLIMS are not included because under the SHARIAH LAW they can have DIVORCE in the PHILIPPINES. Divorce mostly comes in, when couples have conflict and they have a problem. Divorce is one of the solution in separating couples, for the Wife and husband can have freedom. Divorce is better than having conflict in the fight in the family. It is the best solution for the family when having conflicts. Like our neighbor, (this is an evidence) the wife and husband had a conflict between them. But the husband had a power, he hurt the wife so this affects the children. This will not be good for them, so the family decided to be separated. But because they were MUSLIMS they had a divorce. This is an example of having a divorce. This only means that DIVORCE IS A BEST SOLUTION FOR A FAMILY THAT HAVE BEEN IN A CONFLICT. In divorce, there will be no conflict in the process. In choosing where will the children go, the family and their Lawyers will decide. Not only the child but also the properties. This will be a good solution for them for them not to have quarrel and the children will not be affected. Divorce †¢ 1) n. the termination of a marriage by legal action, requiring a petition or complaint for divorce (or dissolution in some states, including California) by one party. Some states still require at least a minimal showing of fault, but no-fault divorce is now the rule in which incompatibility is sufficient to grant a divorce. The substantive issues in divorces are division of property, child custody and support, alimony (spousal support), child visitation and attorneys fees. Only state courts have jurisdiction over divorces, so the petitioning or complaining party can only file in the state in which he/she is and has been a resident for a period of time (as little as six weeks in Nevada). In most states the period from original filing for divorce, serving the petition on the other party and final judgment (or decree) takes several months to allow for a chance to reconcile. †¢By definition divorce is a legislatively created, judicially administered process that legally terminates a marriage no longer considered viable by one or both of the spouses. Divorce is also known as dissolution of marriage. Traditionally, divorce was fault based. In other words, there was an innocent or injured party and a party that had done wrong with the innocent party being able to obtain relief or a divorce. This system was adversarial in nature. Even if both parties wanted a divorce, one party had to allege wrongdoing by the other. In the 1970s this system was reformed and a no fault system was put in place. There are advantages to doing your own divorce. You might think the most obvious is the financial savings. Dont be fooled. A poorly structured settlement agreement can be more costly to correct after the fact. Keep in mind that this agreement will: †¢Divide your property as well as your debts. †¢Decide parenting issues such as custody, visitation, and child support. †¢Determine if alimony applies and the amount be paid. †¢ If Children Are Involved: Divorce in itself is trying enough. If children are involved, it becomes even more trying and extremely emotional. Parents often loose sight of what is in the best interest of their children. Where do the children fit into this whole new life that is being created? Unfortunately, children often become financial pawns in a divorce when child custody issues are being decided. Children have rights in divorce. Let common sense prevail when it comes to the children. They should not be used as an outlet for anger, nor should they ever be used to get revenge against your spouse. Dont bad-mouth your ex-spouse in front of your kids, even if you are still angry or feuding. Try not to use your kids as a messenger or go-between, especially when youre feuding. Children are egocentric. They think their role in things is much more important than it really is. Because of this, they often feel that they have in some way caused the divorce. Make sure they know it is not their fault. It is also important for kids to know that just because parents divorce each other, theyre not divorcing their kids. Some kids think that if their parents are divorcing, it means their moms and dads will want to leave them, too. Remind them often that your love for them is unconditional and will not change because of the divorce. There are many aspects of divorce that need to be considered including: custody and visitation; financial issues such as alimony and child support, taxes, pensions and insurance; hiring an attorney or mediator; determining if you should do your own divorce; separation agreements and much more. Alimony Comprehensive guide to the different types of alimony, including the criteria generally used in the determination and amount of alimony, and tax ramifications. Child Custody Reviews the different types of child custody. The emotional (for both child and parent) and financial points of view of a custody battle are also discussed including court ordered professional custody evaluations. The best solution for having separation is divorce.

Media Images of Women free essay sample

Women who look at thinner and taller women think negatively of themselves; they become insecure and develop a low self-esteem. In todays advertising, people find the best suited person to be in their ads. They only expect young, thin, and tall models to be in them. The advertisers figure the more attractive looking the models are, the more people will look at the advertisements. This is indeed true, because how many commercials or magazines do you encounter that do not have these physical attractions. Why are standards of beauty being imposed on women, the majority of whom are naturally larger and mature than any of the models? The average model is around 511† and weighs about 117lbs. On the other hand, the average woman is usually 54† and weighs close too 140lbs. This is ludicrous, since 80% of women are unhappy with their appearance. Women who are insecure of their bodies are more likely to buy into beauty product and diet supplements. We will write a custom essay sample on Media Images of Women or any similar topic specifically for you Do Not WasteYour Time HIRE WRITER Only 13.90 / page It is estimated that the diet industry alone is worth anywhere between 40 to 100 billion dollars a year selling temporary weight loss; about 90 to 95% of dieters regain the lost weight. Other results lead to depression and unhealthy eating habits. Still, no matter how much weight a woman loses. It is never enough to satisfy a womens thirst for beauty and perfection. Yi 2 Life is always a big competition to everybody, especially for women. When females are constantly exposed to images that conform to the same sociocultural standards of attractiveness from the media, they are sent a message about how they must appear in order to be judged as attractive. For example, you come across a girl who is skinny and pretty, but she isnt satisfied with herself and thinks she is fat or wishes she can lose more weight. This is cause of the media, it makes young women look at thin models and they see themselves as fat in comparison. Honestly, how much weight does a woman need to lose to become satisfied? They do this in order to fish for compliments from other people, so they can feel better about themselves. Woman are blinded from their natural beauty, because they are corrupted by ads shown on T. V commercials and magazines. Popular magazines like People, Rolling Stone or Star. Each one of them you find tall, thin, young physical attractions. Examples are movie stars, models, or big time celebrities, which makes ordinary people think of themselves unattractive. An example of a celebrity is Kim Kardashian. She is beautiful and well known. Young women look up to her and wants to know her secrets to be like her. She is probably in every magazine I have mentioned. She even has her own television show, also she is in many commercials and even has her own perfume brand. People look at her with astonish eyes. Have you ever seen the commercial with the Sketcher: Shape ups with Kim Kardashian in it? It shows how well toned her body is head from toe. It is set at a gym and her kicking her personal trainer to the side and saying, â€Å"I dont need him†,and winks. This is sending a message out saying, buy the shoes Kim is wearing and it will make you beautiful like her. That should not be the way to sell your ads. It is being bias about advertising. Its not like wearing the shoes instantly makes you like Kim Kardashian. Commercials should motivate people rather than showing a unrealistic idea. They should show a positive and healthier way. An example is, they should Yi 3 motivate consumers in their advertisements. The advertisers should have showed Kim exercising with the shoes and made her look like she is working to get that perfect body rather than just wearing the shoes. One celebrity I think highly of is Adele. She is well known singer. She has a beautiful voice, as an angel. She does not have all the physical attraction. She does not have a body like Kim Kardashian but she is still beautiful in her own way. Adeles singing motivates many people who loves her work. Her physical appearance even impresses everybody. We see so many artist, and they all look the same tall, thin, and young. Adele on the other hand, does not fall into that category, which makes her the unique and favorable. People believe anything they see in television or in magazine; it scares me. Is society so sucked into who is more beautiful than one another? They see something they like and they try to be it. Why not be yourself and show your own beauty. Rather than being something you are not. Woman pay too much attention what is in the media and they forget about themselves and their true beauty. Women suffer way to much in order to create a perfect body image to prove to themselves, that they are beautiful. We need to put healthier images of beauty in the advertising business. Maybe even then women would feel a bit better of themselves and bring a healthier lifestyle.

What is Sarbanes-Oxley Act

What is Sarbanes-Oxley Act Free Online Research Papers Sarbanes-Oxley Act has been implemented since 2002. It main purpose was to regain the confidence in the capital market by forcing mandatory standards and rules for companies. This paper studies the reasons for the Sarbanes-Oxley Act and the positive and negative impact that Sarbanes-Oxley Act has placed on companies. Reason for SOX The reason for the Sarbanes-Oxley Act of 2002 came about because of Kenneth L. Lay, CEO of Enron Corp. Enron began in 1986 but originally was Houston Natural Gas a gas pipeline operator in 2001 Enron was the number one energy trader in the world. Enron direct competition was Duke Energy, El Paso, and Williams Companies to name a few. However, in 2002, Enron filed for bankruptcy and Lay was involved in one of the biggest accounting fraud crimes. Lay hide sales of the company’s shares and said that he was buying more shares (Henry, 2006). No one ever questioned Lays acts and never questioned or investigated the trading rules for someone trading within an organization. In that time, executives did not have to report their transactions with their companies the end of a company’s fiscal year and after 45 days and some times it they could take up to 12 months (2006). â€Å"Congress clamped down and directed the Securities Exchange Commission to require reporting of tra nsactions within two business days, effective Aug. 29, 2002. At the time, recalls then-SEC Chairman Harvey L. Pitt, regulators didnt even know companies were backdating options grants† (Henry, 2006, pg.38). As result of Enron’s scandal and public bankruptcy of such a well recognized corporation. Congress passed the Sarbanes-Oxley Act of 2002 known as the Sarbanes-Oxley Corporate Accountability Bill. The Sarbanes-Oxley Act requires for all public companies that have business in the United States must have an accounting framework (Nelson Staley, 2006). Sarbanes-Oxley Act of 2002, made it mandatory for all public companies to contain internal financial auditing controls and to present the results in annual assessment their internal financial auditing control efficiency. This must be reported to the Securities and Exchange Commission (SEC) in an annual basis. Also, the Sarbanes-Oxley Act of 2002 required for all public companies to have an external auditor and the external auditor would have audit and test on the company’s internal control reports of management and the company’s financial statement (Baker, Bealing Jr, Nelson Staley, 2006). Sarbanes-Oxley Act of 2002 The following provides an overview of the Sarbanes-Oxley Act in which public company are required to comply. Title I of the Act – established the Public Company Accounting Oversight Board (PCAOB). Title I which was given broad oversight over public accounting firms who perform audits of publicly traded companies. According the Public Company Accounting Oversight Board states, section 103(a)(1) of the Sarbanes-Oxley Act of 2002 that Board establishment and their responsibilities and to establish auditing standards and rules. In addition, this Board defines the ethics standards for the audit reports that registered accounting firms must prepare and submit (Baker, Bealing Jr, Nelson Staley, 2006). Title II of the Act – established the Auditor Independence which pro services. The Securities and Exchange Commission adopted amendments to its existing requirements regarding auditor independence to enhance the independence of accountants that audit and review financial statements and prepare attestation reports filed with the Commission. In addition, these rules and standards affect the foreign accounting firms that perform audits of foreign subsidiaries and affiliates of U.S. issuers, as well as of foreign private issuers. According to Baker, Bealing Jr, Nelson, Staley: Many of the modifications to the proposed rules, such as those limiting the scope of partner rotation and personnel subject to the cooling off period, have the added benefit of addressing particular concerns raised about the international implications of these requirements. Moreover, additional time is being afforded to foreign accounting firms with respect to compliance with rotation requirements. The release also provides guidance on the provision of non-audit services by foreign accounting firms, including the treatment of legal services and tax services (2006, p.5) Title III of the Act – established the Corporate Responsibility which imposed public company audit committees. It defined the corporate responsibility for financial reports. It defined the improper influence on conduct of audits. It clearly points the penalty of certain bonuses and profits. In addition, section 302 is one the most important sections of the SOX Act. Established the Corporate Responsibility for Financial Reports it demands for CEO and CFO to review all financial reports. The financial reports must not have any fabrication or faulty information. It also directs the responsibilities to the companies CEO and CFO for the internal accounting controls. The CEO and CFO have the obligation to report any leakage in internal accounting controls. In addition, CEO and CFO must report any management of the audit committee for fraud actions or participation. They must point out any internal accounting controls information modification. Title IV of the Act – Established Enhanced Financial Disclosure. Section 401 Disclosures in periodic reports conflict of interest provisions. Section 402 Enhanced conflict of interest provisions. Section 403 Disclosures of transactions involving management and principal stockholders. Section 404 is another most important section of the SOX Act of Title IV. Section 404 established Management Assessment of Internal Controls this demands for management that all annual financial repots must have an Internal Control Report stating that management is responsible for an â€Å"adequate† internal control structure. Any shortcomings in these controls must also be reported. In addition, registered external auditors must attest to the accuracy of the company management’s assertion that internal accounting controls are in place, operational, and effective. Sarbanes-Oxley Section 404 (SOX 404) requires a security management process to protect against attempted or successful u nauthorized access and use with system operations. Sarbanes-Oxley Section 404 also involves security management for disclosure, modification, or interference with system operations. Section 405 is defines the exemption to the TITLE IV. Section 406 is the Code of ethics for senior financial officers. Section 407 is the disclosure of audit committee financial experts. Section 408 is the enhanced review of periodic disclosures by issuers. Section 409 Real time Disclosures states that must disclose information on material changes in the financial conditions or operations of the issuer on a rapid and current basis. Section 409 is another most important section of the SOX Act of Title IV. However, section 409 is the only section that is not currently in effective. This section is Real Time Issuer Disclosures meaning companies are required to disclose on almost real-time basis information concerning material changes in its financial conditions or operations. Title V of the Act – established the Analyst Conflicts of Interest. Section 501 the treatment of securities analysis by registered securities associations. The national securities exchanges and registered securities associations must adopt conflict of interest rules for research analysis who recommend equities in research reports. Title VI of the Act – established the Commission Resources and Authority. Section 601 is the Authorization of appropriations. Section 602 is appearance and practice before the commission. Section 603 is Federal court authority to impose penny stock bars. Section 604 Qualifications of associated persons of brokers and dealers. Title VII of the Act – established the Studies and Reports. In section 701 is GAO study and report regarding consolidation of public accounting firms. Section 702 is commission study and report regarding credit rating agencies. Section 703 is the Study and report on violators and violations. Section 704 is the study of enforcement actions. Section 705 is the study of investment banks. Title VIII of the Act Corporate and Criminal Fraud accountability. In section 802 are criminal penalties for altering documents. Section 803 Debts non-dischargeable if incurred in violation of securities fraud laws. Section 804 is Statute of limitations for securities fraud. Section 805 is review of Federal Sentencing Guidelines for obstruction of justice and extensive criminal fraud. Section 806 is Protection for employees of publicly traded companies who provide evidence of fraud. Section 807 defines the criminal penalties for defrauding shareholders of publicly traded companies. Title IX –White-Collar Crime Penalty enhancements. Section 902 is the attempts and conspiracies to commit criminal fraud offenses this section is another of the most important section of the SOX Act. It states that any person who attempts or conspires to commit any offense under this chapter shall be subject to the same penalties as those prescribed for the offense, the commission of which was the object of the attempt or conspiracy. Section 903 states criminal penalties for mail and wire fraud. Section 904 is criminal penalties for violations of the Employee Retirement Income Security Act of 1974. Section 905 is the amendment to sentencing guidelines relation to certain white-collar offenses. Section 906 states it is corporate responsibility for financial reports. Title X of the Act – established the corporate tax returns. Section 1001 Sense for the Senate regarding the signing of corporate tax returns by chief executive officers. Title XI of the Act – established the corporate fraud and accountability. Section 1102 is the tampering with a record or otherwise impeding an official proceeding. Section 1103 is temporary freeze authority for the SEC. Section 1104 is the amendment to the Federal Sentencing Guidelines. Section 1105 Authority of the Commission to prohibit persons from serving as officers or directors. Section 1106 is increased criminal penalties under the Securities Exchange Act of 1934. Section 1107 protects whistler blowers section 1107 is the retaliation against informants. The Impact of Sarbanes-Oxley Act The Sarbanes-Oxley Act has applied positive effect to companies. The public companies are forced to compliance with the Act and ensure that their accounting operations are up to standards with SOA. However, private or non profit organizations are being exempt from this Act. â€Å"Still, many such entities are finding that certain aspects of the act can benefit their overall operations and are cherry-picking those parts that will do them the most good† (Savich, 2006, pg. 71). In addition, many private organizations are taking advantage of only select the sections of the Act that beneficial. Why would these private organization voluntary adopt SOA knowing how public companies struggle to comply with the SOA standards? One reason why private organization would want to comply with SOA standards is if the private organization is planning to merge with a public organization. Then they have advantage of preparing for the cost and sufficient time to prepare to meet those required for Sarbanes-Oxley Act. A second reason for an private organization to voluntary adopt SOA would be if the private company knows that is going to become public then they adopt the Sarbanes-Oxley Act since they know it will be mandatory (Savich, 2006). Another reason would be if a private company is forecasting a IPO within next years it would be benefit for them to start compliance with the Sarbanes-Oxley guidelines earlier than later to avoid any delay and expect cost (Savich, 2006). Even non-profit organizations are volunteering to comply with Sarbanes-Oxley provisions. â€Å"In California, for example, the Nonprofit Integrity Act of 2004 requires charitable organizations with over 2 million in gross revenues to have an audit committee, which also approves non-audit services, and audited financial statements† ( Savich, 2006 ). Private organizations are in position that they adopt the sections that they want with advantage of not having to spend excessive amounts of money to set up for an auditors assessments of internal controls. Instead, their company can intake the benefits of the Sarbanes-Oxley Act without incurring significant costs (Bednarz, 2006). Congress intended for the Sarbanes-Oxley Act to apply only public companies. But a national study by Foley Lardner LLP, showed that Sarbanes-Oxley Act took another path. It has been revealed that these private and nonprofit organization continue to adopt provisions of the act as best practices with out have obligation. The study concluded nonprofit organization was more impulsive to adopt the Sarbanes-Oxley standards, while private companies have been steadily adopting Sarbanes-Oxley standards but not as much as nonprofit organization. In addition Nonprofits organization are more likely to implement or plan to implement whistle-blower procedures, board approval of non-audit services by auditors and restrictions on executive compensation, among other changes. According to study findings of Foley Lardner LLP: Private companies tend to adopt the least expensive reforms, as opposed to more costly initiatives such as section 404 audits of internal controls. Some 84% of private organizations responding to the survey believed corporate governance reform was about right, an increase over the 78% who had responded that way in 2005. Survey respondents estimated an average annual price tag of $105,000 for corporate governance procedures, a 26% increase over their estimated costs before Congress Foley Lardner surveyed 56 private entities in January 2006-20 nonprofit organizations and 36 for-profit private companies enacted Sarbanes-Oxley (Savich, 2006) In another study named Voluntary Compliance survey conducted by CEO’s of â€Å"fast-growing† private companies. 27% said their companies had adopted Sarbanes-Oxley best practices in areas such as governance and transparency. 73% opposed any future federal or state regulations that would impose Sarbanes-Oxley provisions or entities other than public companies. 67% of those considering going public said the cost of Sarbanes-Oxley compliance was a potential barrier (Savieh, 2006) Many public companies are struggling to comply with the Sarbanes-Oxley because of the high costs and implementations complexity. Even larger companies like: General Electric, Lockheed, and Emerson Electronic are struggling to meet the Act standards. In meeting held in Washington, D.C. the Executives of these corporations emphasis the challenges they face to comply with Sarbanes-Oxley Act. (Bednarz, 2006) Executives stated, that cost for comply with Sarbanes-Oxley does compensate for benefits of having Sarbanes-Oxley. The cost for implementing software that complies with Sarbanes-Oxley Act is very expensive. This is affecting smaller public companies that do not have the funds to implement these softwares. According to Robilliard, In the recent study of IT managers in the US, the Aberdeen Group found that most companies plan to leverage their existing software tools to fill any gaps to comply with the Act, (Ismail, 2005, p 4). Critics of regulation argue that the Sarbanes-Oxley Act has raised the cost of being a public company so much that it is unreasonable to impose this burden on smaller public companies. The critics main concern is Section 404, which deals with internal control audits. These critics assert that the high cost of being a smaller public company will stifle economic growth and ultimately hurt U.S. competitiveness (Hermanson, 2006). According to Hermanson, For honest corporate officers, this is classic governmental over-regulation-a dagger aimed at the heart of the U.S. economy. . . . The most dangerous aspect of this regulatory overkill is a further inclination by corporations to hold onto money rather than put it into productive investment, thereby threatening to stifle economic growth. Even the SECs advisory committee concluded, after hearing testimony from various parties, that Section 404 is a burden for smaller public companies. In an August 18, 2005, letter to SEC Chairman Cox, The committee stated, The costs of implementing Section 404 have been far more expensive than originally forecasted and these costs are disproportionately larger for smaller companies. (200 According CPA Journal survey by Financial Executives International reported that small companies are projected to spend $824,000 in order to comply with Sarbanes-Oxley Act. In addition, the average cost for all companies is $4.3 million estimates. However, public companies are estimated to spend $6.1 billion in order to implement Sarbanes-Oxley Act (Koehn DelVecchio). The Sarbanes-Oxley Act and the Security Exchange Committee rules can impact internal auditors in numerous ways. One way is internal auditors probably will be asked to expand their internal control evaluation and testing work in order to provide assurance to upper management when they attest to the relative strength of their internal control system (Aldhizer III, Cashell Savlyor, 2003). Pricewaterhouse Coopers in a discussion document stated, that good internal controls are no longer just a best practice, but are now reinforced in the Sarbanes-Oxley Act as a critical component of good corporate governance (Aldhizer III, Cashell Savlyor, 2003). Upper management and the audit committee are depending on internal auditors to help them comprehend difficult financial reporting issues and their impact on the quarterly and annual report (Aldhizer III, Cashell Savlyor, 2003). If the Sarbanes-Oxley Act increase internal auditors responsibilities companies take the risk of this having an impact on the current level of services provided by internal auditors. Many organizations may be unwilling to increase internal audit resources to the level required to completely fulfill both existing and new responsibilities. If this occurs, internal audit departments will have to decide either which services to cut or how to continue providing the same level of service with fewer resources (Aldhizer III, Cashell Savlyor, 2003). Audit fees are arise because of the need to present more in depth audit work in order to gain the necessary information and the loss of income from higher-margin consulting work are affect the higher costs. Eventually, it will affect the relatively few companies that were involved in the accounting frauds, but all companies and consumers (Gifford Howe, 2004). According to a recent Financial Executives International (FEI) survey conducted, it reported that the first-year compliance costs ranging from $2 million to $5 million. (Gifford Howe, 2004) consulting firm The Johnsson Group has estimated total 2004 costs to run upwards of $15 billion, with many large companies seeing thousands of hours diverted from staff support and research activities to compliance work. Many of the smaller companies are affected by this because they do not have money to obtain staff support and necessary requirements. Another provision that may notably increase audit fees relies in the Sarbanes-Oxley Acts to far-reach authority. The act affects any firm that audits a publicly traded U.S. company (Gifford Howe, 2004)). For example, any foreign subsidiaries or affiliates of public accounting firms may conclude that they do not want be involved with a clients operations in its native country because of U.S. regulations. Therefore, U.S. firms would have to conduct the audit for client’s foreign subsidiaries, at the client’s expense. This sufficiently require more time and cost. â€Å"In addition, the move by U.S. regulators to review the work of foreign accounting firms could prompt retaliation by other countries in the form of reviewing the work of U.S. firms that audit U.S. subsidiaries of foreign multinationals† (Gifford Howe, 2004, p. 7) Another reason for fees to arise can the fact that auditor have the obligation to include in the audit report the effectiveness of internal controls over financial reporting and managements assessment of it (Gifford Howe, 2004). Although Sarbanes-Oxley Act is not intended for increase of charge fees be based on the auditors evaluation be the basis given the increased political costs and potential legal liability associated with such an assertion, audit firms and management will probably need to spend significantly more time evaluating controls, particularly for engagements or audit areas with low reliance on controls (Gifford Howe, 2004). The expectation that audit firms would accept additional risk without doing additional work, and that they would perform the additional work without increased compensation. Conclusion The Sarbanes-Oxley act has provided negative and positive impacts to companies regardless of the size of the company. However, small companies are definitely being more deeply affected by the Sarbanes-Oxley Act in their pockets. The positive impact of compiling with Sarbanes-Oxley Act has provided standards and rules for organization that needed them. Even though Sarbanes-Oxley Act is not mandatory for private and non-profit organizations many are adopt Sarbanes-Oxley Act because of its positive benefits to the organization. Reference Aldhizer, G.R., III, Cashell, J.D., Saylor, J. D. (2003) Ten months later: Internal audit directors assess the impact of the Sarbanes-Oxley Act. Internal Auditing, 18(3), 3. Baker, R. L., Bealing, W. E., Jr., Nelson, D. A., Staley, B. A. (2006). An institutional perspective of the Sarbanes-Oxley Act. Emerald. Retrieved from May 15, 2006, from emeraldinsight.com/0268-6902.htm Bednarz, Ann. (2006, May 15). Sarbanes-Oxley: Too much for too little? Network World, 23(19) 1-2. Gifford, R. H., Howe, H. (2004). Regulation and unintended sequences: Thoughts on Sarbanes-Oxley. The CPA Journal, 74(6), 6-10. Hermanson, D. R. (2006). What to do about smaller public companies’ internal controls? Internal Auditing, 21(1), 41-43. Henry, D. (2006, June 12). A SarbOx Surprise. Business Week. Retrieved May 22, 2006, from http://0-proquest.umi.com.novacat.nova.edu/pqdweb?did=1051235551sid=1Fmt=3clientId=17038RQT=309VName=PQD Ismail, I. (2005, April 7). Raising awareness of Sarbanes-Oxley Act. New Straits Times, pp.04. Koehn, J. L., DelVecchio, S. C. (2006). Revisiting the ripple effects of the Sarbanes-Oxley Act. The CPA Journal,76(5),3. Savich, R. S. (2006). Cherry-Picking Sarbanes-Oxley. Journal of Accountancy, 201(6), 71-74). Research Papers on What is Sarbanes-Oxley ActThe Project Managment Office SystemTwilight of the UAWAnalysis of Ebay Expanding into AsiaMarketing of Lifeboy Soap A Unilever ProductDefinition of Export QuotasPETSTEL analysis of IndiaUnreasonable Searches and SeizuresIncorporating Risk and Uncertainty Factor in CapitalCapital PunishmentStandardized Testing

First or Second Conditional Explained

First or Second Conditional Explained The first and second conditional in English refer to a present or future situation. Generally, the difference between the two forms depends on whether a person believes that a situation is possible or unlikely. Often, the condition or imagined situation is ridiculous or clearly impossible, and in this case, the choice between first or second conditional is easy: We choose the second conditional. Example: Tom currently is a full-time student.If Tom had a full-time job, hed probably work in computer graphics. In this case, Tom is a full-time student so it is obvious that he does NOT have a full-time job. He might have a part-time job, but his studies demand that he concentrates on learning. First or second conditional? Second conditional because it is clearly impossible. In other cases, we speak about a condition that clearly possible, and in this case, choosing between the first or second conditional is easy again: We choose the first conditional. Example: Janice is coming to visit for a week in July.If the weather is good, well go for a hike in the park. Weather is very unpredictable, but its quite possible that the weather will be good in July. First or second conditional? First conditional because the situation is possible. First or Second Conditional Based on Opinion The choice between first or second conditional is often not so clear. Sometimes, we choose the first or second conditional based on our opinion of a situation. In other words, if we feel something or someone can do something, then well choose the first conditional because believe it is a real possibility. Examples: If she studies a lot, she will pass the exam.They will go on holiday if they have the time. On the other hand, if we feel that a situation is not very possible or that a situation is improbable we choose the second conditional. Examples: If she studied harder, she would pass the test.They would go away for a week  if they had the time. Here is another way of looking at this decision. Read the sentences with the speakers unspoken thought expressed in the parentheses. This opinion shows how the speaker decided between the first or second conditional. If she studies a lot, she will pass the exam. (Janes a good student.)If he worked harder, he would pass the exam. (John doesnt take school seriously.)Tom will take some time off next week if his boss says its OK. (Toms boss is a nice guy.)Frank would take some time off next month  if he could get an OK from his supervisor. (Unfortunately, his supervisor isnt very nice and theres a lot of work to be done next month.) As you can see from the examples above, the choice between the first or second conditional can express someones opinion about the situation. Remember that the first conditional is often called the real conditional, whereas the second conditional is often referred to as the unreal conditional. In other words, the real or conditional expresses something the speaker believes could happen, and the unreal or second conditional expresses something that the speaker doesnt believe could happen. Conditional Form Practice and Review To improve your understanding of conditionals, this conditional forms page reviews each of the four forms in detail. To practice conditional form structure, this real and unreal conditional form worksheet provides a quick review and practice exercises, the past conditional worksheet focuses on using the form in the past. Teachers can use this guide on how to teach conditionals  to introduce and practice the first and second conditional forms in class.

Islam Religion Field Research Paper Example | Topics and Well Written Essays - 1750 words

Islam Religion Field - Research Paper Example It is partially due to the very reality that faith in the Supreme Being is in the basic human instinct, which could not be denied or ignored altogether. â€Å"The critical difference between a religious and non-religious person is the acceptance of the transcendent, or otherworldliness, as the first reality. The transcendent provides a vehicle for meaning outside life itself and because, to the religious person, it has ontological primacy over the material world it provides a solid grounding.† (Prevos, 2005:3) Hence, religion gives meaning to human life, by making people oriented with the morality, ethics, values and systematic patterns of acting, reacting and behaving while entering into interaction with the social and natural environment. Thousands of religious belief systems exist on the face of the mother-earth, which maintain several similarities and differences from one another in nature, scope and teachings. In the long list of countless beliefs, Abrahamic faiths, inclu ding Judaism, Christianity and Islam, are quite distinguishing ones from the rest, and seek inspiration from one and the same light. Not only this that the Holy Scriptures of these three faiths narrate the same tales, but also all the three share one and the same mythology including the Oneness of God, existence of the holy prophets, angels, heaven and hell, Day of Resurrection and life after death., and reward and punishment on the concrete foundations of the deeds and misdeeds performed and committed respectively during their stay on earth as mortals. Although the Abrahamic religions are similar to one another in different ways, the followers of these faiths abhor each other and observe serious reservations on the basis of the misconceptions they have developed for one another without conducting any in-depth research on the philosophy and doctrine of purported rival faiths. It is therefore all the three Abrahamic faiths appear to be at daggers drawn against one another, where slig htest space of displaying tolerance towards one another has turned out to be a dream particularly during the contemporary times. The same was the situation with me, as being the true follower of the Christian faith, I viewed Islam as the religion consisted of extremists and fundamentalists, which condemned and censured people’s mixing up with the Jews and Christians as well as developing cordial social and corporate relationships with them at any cost. I also view the Muslims as hard-hearted nation, which looks down upon the others by declaring them pagans, atheists and infidels. Keeping in mind all these reservations, I decided to attend a religious gathering arranged and organized by the Muslims for some spiritual and moral purpose, so that I could have personal experience of the teachings and behavior adopted and observed by the Muslims. Though I had developed the very idea that interviewing some religious person at an Islamic center might bring some alteration in my estab lished onion about the Muslims, yet attending of the gathering brought revolutionary changes in my views about the community I had maintained serious reservations in past, and I returned from there carrying new image about Islam and Muslims at large. Last week I visited a mosque, situated in my city during the month of Ramadan, the ninth month according to the Islamic calendar. The month is reserved for fasting, and the Muslims keep fast the entire month from dawn to the sunset. However, the Shiite Muslims break their fast after ten minutes of sunset, as they argue that the sunset completes after seven to ten minutes of the apparent disappearance of the sun. Somehow,

Medical Marijuana Essay Example | Topics and Well Written Essays - 750 words - 2

Medical Marijuana - Essay Example I, therefore, agree with the medical findings on the use of marijuana for medical reasons and the benefits of medical marijuana. The use and legalization of marijuana have led to controversies in the society. These controversies consist of opposing views on medical marijuana; there are those who are in support of its use and legalization and those who are against its use and believe its use should be banned. According to studies done thoroughly by the medical research and studies, the use of marijuana does show positive signs of relief when used in the treatment of various medical illnesses. Diseases such as arthritis, depression, HIV, cancer and other chronic conditions affect a huge percentage of the society’s population today. With no treatment at all or few treatment and cures for these medical conditions, the use of medical marijuana has been a good alternative to alleviate the suffering faced by these people having these illnesses. Marijuana content contains ingredient referred to as tetrahydrocannabinol (THC) which is active. After smoking marijuana, this ingredient gives the individual a  "high† feeling. According to the American Cancer Society, the active ingredient in marijuana helps in reducing pain and other cancer symptoms. With these concrete research report, the FDA has agreed on the use of tetrahydrocannabinol in marijuana for therapeutic and medical purposes (Anderson, Hansen, & Rees, 2012). Despite the fact marijuana, use for medical reasons may have positive effects on some medical illnesses and conditions; on the other hand, it also has its negative effects. Most of the population in the society knows that marijuana is an illegal drug. Approximately seventy-eight percent of marijuana users in the society smoke marijuana for recreational purposes as well as personal enjoyment. For this purpose, this drug is made illegal in most countries. The law

The Cinema Essay Example for Free

The Cinema Essay The movies that are being compared here are made at two different periods of time and for audience of distinct mentality. Movies are made keeping in mind the taste of audience because it is totally show business. But here two movies, one of which was made almost more than 50 years before the other are somewhat similar. The base of â€Å"Singin’ in The Rain†, made in 1952 is same as â€Å" Linda Linda Linda† which was released in 2005. Both the films are musical blockbusters and were liked by the audience at the time of release and afterwards too. If we compare both these movies we will see that the plot of old ovie is not typical and lots of Hollywood movies has been made on this plot but â€Å"Singin’ in The Rain† is remembered today because it took the cinema from silent era to talkies. Its music is being admired till date and is considered as a movie with great combination of action and humor. The film is a total entertainer with almost everything being expected from a movie. â€Å"Linda Linda Linda† came out in 2005 targeting a different audience that was young and in the modern era. The taste of this audience was completely different from that of 1950s ut this movie also proved to be successful and the base here was once again music and dance. The story of course is admirable here and the film is entertaining and technically competent. There are four girls who want to create their own rock band for the upcoming function of their school. Plot of the movie revolves round the experiences of these girls to find a singer and everything needed to make a band. Their ultimate challenge became to play a single song for the function. The movie of the 1950’s was focusing on the music of that period and that of 2005 represents the music of this era.

A critical review of the major opposing views on arbitration & industri

This paper will critically review the major opposing perspectives on arbitration and industrial relations, with particular attention to how government regulation and intervention relate to the changes made to the system after 1996. The major focus of this brief paper will be to demonstrate that Howard’s industrial relations policies resemble those of the late 1800’s, where the Master and Servant Act’s regulated the relationships between employer and employee. These were replaced with the introduction of the Commonwealth Court of Conciliation and Arbitration (1904-1921). The outcome from such dramatic change in industrial relations was the forming of unions and major strikes. Subsequently, the new system of employer and employee relations sought to resolve labour disputes and enhance the quality of life for Australian workers. Moreover it was steeped in social democratic ideals and worked to give every Australian a decent standard of living. These ideals have yet shifted back to the individual contract model where the market predetermines wages and working conditions. During pre-federation when free labour came to dominate the colonies; workers exercised their civil citizenship rights through entry into individual employment contracts. The master and servant laws which empowered these individual contracts were imported from Britain and were quickly implemented and regulated in the Colonies. Isaac argues that ‘the master and servant acts †¦ both in concept and practice reflected the harsh penal code used against the convicts’. However, the latter part of the 1800’s brought with it the rising political influence of the working classes and an increasingly powerful trade union. The modification of the master and servant laws through the collectivisation of union groups resulted in a greater role fir state interventions. The 1890’s saw the emergence of many disputes over working conditions and the power employers had over employees, which was legitimised by law. Australian workers were illustrating this through strikes and the formation of unions. In recognising the duty of government to be the protection and economic welfare of its citizens, a court of Conciliation and Arbitration was established in Australia in the 1890’s. The new systems were based in social democratic ideals and worked to give ever... ...ts to replace the idea of "industrial relations" with that of "employee relations" reflect efforts to draw attention away from institutions like tribunals and unions, towards individuals and their direct relationships. Bibliography Bolton, G., (1990) The Oxford History of Australia, vol.5, '1942-1988: The Middle Way', Oxford University Press, Melbourne. Isaac, J., (1998) Australian Labour Market Issues: An Historical Perspective, Journal of Industrial Relations, vol. 40, no. 4, pp. 690-15 MacIntyre, P.G., (1985) A Fair Wage in Winners and Losers: The Pursuit of Social Justice in Australian History, Allen and Unwin: Sydney McCallum, R., (1996) The New Millennium and The Higgins Heritage: Industrial Relations in the 21st Century, Journal of Industrial Relations, vol. 38, no. 2, pp.294-312. Parkin, A., Summers, J., & Woodward, D., (1980) Government, Politics and Power in Australia: an Introductory Reader, Melbourne, Victoria. : Longman Cheshire, pp. 372-74 Schmitthoff, C. (1990) Export Trade: The Law and Practice of International Trade: 9th Edition. London: Sweet & Maxwell Solomon, D., (1999) End of the Era of Arbitration, Courier Mail 27th March.

Proposal for Fashion Industry Essay

Age: The consumer club of Espire company would like to know how customer spend their money every day. Many customers complain that they do not have enough money at the end of the month. The purpose of this questionnaire is to find out the inequity of our customer. It will determine where they go to shopping, How much they spend on items they buy, is the product is affordable and etc. The data will be kept confidential. Please return completed questionnaire to your introduce or put it in the envelope in front of room g15. Indicate your feeling about the following items by ticking ( / ) on the appropriate line. 1. What is your work status? Student Working Self-employed 0thers, please specify __________ 2.What is your annual spending on designer and fashion accessories in a year? Less than RM100 RM100-RM400 RM401-RM900 RM901-RM1500 More than RM1500 3.Do you think our products are affordable to buy? Yes No 4. How important are the following features of a shopping experience to you? Important Unimportant Price On-Trend Brand Convenient Location Store Atmosphere Product Quality 5. Please indicate your level of agreement with the following statement. Agree Disagree Espire has low prices Espire has a contemporary image Espire has a well known brand name Espire has a convenient location Espire produces high quality products Espire is a trendsetter Thank you for your cooperation ESPIRE COMPANY QUESTIONNAIRE Â  Name: Gender:Â  Age: The consumer club of Espire company would like to know how customer react on usage of real animal fur .Many customers complain that they don’t encourage the usage of real animal fur in our daily life. Meanwhile the others prefer to use real animal fur in our daily life.The purpose of this questionnaire is to find out which type of society is majority in this world. It will determine what type of material they use , what items they buy, is the product is worth it and etc. The data will be kept confidential. Please return completed questionnaire to your introduce or put it in the envelope in front of room g15. Indicate your feeling about the following items by ticking ( / ) on the appropriate line. Yes No 1. I do not use clothes and accessories made from real animal fur. 2. I change my clothes made from real animal fur regularly. 3. Clothes and accessories made from Real animal fur is popular among Teenagers and adults. 4. Where do you get information about products made from real animal fur? friend magazine tv/radio the internet newspaper other, please specify _________________ 5. Please rank the following criteria you use in materials used in fashion industry (1- Most preferred to 5 –lease preferred) real animal fur cotton pvc price brand name

Osmosis: Concentration

OSMOSIS and TONICITY IN POTATO STRIPS The purpose of this experiment was to make observations and conclusions about the ability of cells to adjust to varying chemical concentrations in the environment and to observe the effect of isotonic, hypotonic and hypertonic solutions on cells. Hypothesis If a solution is Hypotonic, then water will move from the beaker into the potato because water outside the cell will be in higher concentration than water inside the cell. If a solution is Hypertonic, then the solution will move into the cell from the beaker and water will move out of the cell into the water because of a difference in concentration. If a solution is isotonic, then the cells will remain the same because the solution concentration is the same as in the cell. Materials Fresh potato, knife or scalpel, three test tubes, test tube rack, dropper pipette, paper towels, electronic balance, timer, three provided solutions labeled A, B, and C. Procedure Obtain three test tubes and a test tube rack. Label the test tubes A, B, C using a wax pencil. Cut three French fry type strips of potato 7cm in length, no thicker than 5mm. Pat each potato with a paper towel. Measure the initial mass of each strip and record it before putting each in a test tube. Use a dropper pipette to cover the potato strip in test tube A with solution A, the potato strip in test tube B with solution B, and the potato strip in tube C with solution C. Place the tubes in a test tube rack and wait one hour. Remove the strips from the test tubes after one hour and pat dry with a paper towel. Measure the final mass of each strip and record it. 10. Examine each potato strip and observe any changes in texture. Results In Solution A, the potato slice in the water did not change, indicating the solution contained an equal amount of concentration. In Solution B, the potato slice in the water is larger, indicating that more molecules went into the potato than came out, because there was a higher concentration of water outside the potato. The potato slice from Solution C is much smaller indicating that more water molecules came out of the potato than went in because there was a higher concentration of water inside the potato. Conclusion In conclusion, the hypothesis was found to be correct. Solution A was Isotonic because the final mass of the potato slice was 2. 9 as opposed to 2. 8 at initial mass, which basically stayed the same. Solution B was Hypotonic because the initial mass for the potato slice was 3. 3 then expanded and weighed 3. 6 at final mass. Solution C was Hypertonic because the potato slice lost water and became much smaller in which the initial mass was 2. 8 and the final mass weighed in at 2. 2. In all three solutions, water is moving across the membrane to establish equilibrium. Based on the Diffusion-Osmosis Review on page 26, and not knowing the definite solution in each tube I am going to conclude that there was Saline in Solution A 0. 9% Sodium Chloride which makes cells neutral. In Solution B, therewas a small percentage of salt predicting . 9%. In Solution C, salt was higher than . 9%. All had salt in the tubes but different tonicity. The water could go in or out of the potato to equalize the concentration of salt in the solution. Based on this experiment and using this in real life, it taught me that when mixing the intravenous fluid for a patient to make sure only 0. 9 percent of salt is added in order for the saline to be isotonic to the red blood cells. If not, the red blood cells will expand and complications will arise.

The Case for Euthanasia Should PhysicianAssisted Suicide be Legalized essays

The Case for Euthanasia Should PhysicianAssisted Suicide be Legalized essays The Case for Euthanasia: Should Physician-Assisted Suicide be Legalized? Throughout the twentieth century, major scientific and medical advances have greatly enhanced the life expectancy of the average person. However, there are many instances where doctors can preserve life artificially. In these cases where the patient suffers from a terminal disease or remains in a "persistent vegetative state" or PVS from which they cannot voice their wishes for continuation or termination of life, the question becomes whether or not the patient has the freedom to choose whether or not to prolong their life even though it may consist of pain and suffering. In answer to this question, proponents of physician-assisted suicide, most notably, Dr. Jack Kevorkian, are of the opinion that not only should patients be able to abstain from treatment, but if they have a terminal and/or extremely painful condition, they should be able to seek out the assistance of a doctor in order to expedite their death with as little pain as possible. Contained herein are the arguments for and against the legalization of doctor-assisted suicide, as well as where the state courts stand in respect to this most delicate of issues. In the hopes of clarification, we must first distinguish between active and passive euthanasia. Passive euthanasia involves the patient's refusal of medical assistance. It involves the right to die which is protected by the United States Constitution clauses of due process liberty and the right to privacy (Fourteenth Amendment). The right to doctor-assisted suicide, or active euthanasia, consists of, "...a patient's right to authorize a physician to perform an act that intentionally results in the patient's death, without the physician's being held civilly or criminally liable for having caused the death" . The "passive" form of euthanasia was first deemed legal by the New Jersey State Supreme Court in 1976 In re Quinlan . ...

Definition and Examples of Doublespeak

Definition and Examples of Doublespeak Doublespeak is  language  thats intended to deceive or confuse people. The words used in doublespeak can often be understood in more than one way.   Doublespeak in English Doublespeak may take the form of  euphemisms, unsupported generalizations, or deliberate  ambiguity. Contrast with  plain English. William Lutz has defined  doublespeak  as language which pretends to  communicate  but doesnt.The word  doublespeak  is a  neologism  based on the  compounds  Newspeak  and  Doublethink  in George Orwells novel  1984  (1949), though Orwell himself never used the term. Examples and Observations of Doublespeak Political language . . . is designed to make lies sound truthful and murder respectable, and to give an appearance of solidity to pure wind. (George Orwell, Politics and the English Language, 1946)Employing Orwellian doublespeak, the Texas Department of Agriculture issued a press release that simultaneously touted its efforts to combat  child  obesity while also  lifting a decade-old ban  on deep fat fryers in public schools. Because nothing slims a child’s waist faster than a helping of French fries. (Mark Bittman, What We’re Reading Now.  The New York Times, June 25, 2015) William Lutz on Doublespeak Doublespeak  is  language  which pretends to communicate but doesnt. It is  language  which makes the bad seem good, the negative seem positive, the unpleasant seem unattractive, or at least tolerable. It is  language  which avoids, shifts or denies responsibility; language which is at variance with its real or purported meaning. It is  language  which conceals or prevents thought. Doublespeak is all around us. We are asked to check our packages at the desk for our convenience when its not for our convenience at all but for someone elses convenience. We see advertisements for preowned, experienced or previously distinguished cars, not used cars and for genuine imitation leather, virgin vinyl or real counterfeit diamonds. (William Lutz, Doubts About Doublespeak.  State Government News, July 1993) With  doublespeak, banks dont have bad loans or bad debts; they have nonperforming assets or nonperforming credits which are rolled over or rescheduled.(William Lutz,  The New Doublespeak. HarperCollins, 1996)War and PeaceI reminded [the soldiers] and their families that the war in Iraq is really about peace.(President George W. Bush, April 2003) A Dehumanizing Language A  dehumanising  system requires a  dehumanising  language. So familiar and pervasive has this language become that it has soaked almost unnoticed into our lives. Those who do have jobs are also described by the function they deliver to capital. These days they are widely known as human resources. The living world is discussed in similar terms. Nature is natural capital. Ecological processes are ecosystem services, because their only purpose is to serve us. Hills, forests and rivers are described  in government reports  as green infrastructure.  Wildlife and habitats are asset classes  in an ecosystems market. . . . Those who kill for a living employ similar terms. Israeli military commanders described the massacre of 2,100 Palestinians, most of whom were civilians (including 500 children), in Gaza this summer as mowing the lawn. . . . The army has developed a technique it calls  Shake ‘n Bake: flush people out with phosphorus, then kill them with high explosives. Shake ‘n Bake is a product made by Kraft Foods for coating meat with breadcrumbs before cooking it. Terms such as these are designed to replace mental images of death and mutilation with images of something else. (George Monbiot, Cleansing the Stock’ and Other Ways Governments Talk About Human Beings.  The Guardian  [UK], October 21, 2014) Poker-Table Communication During the weeks of negotiations, the usual intercourse of policy deliberation . . . was interrupted. It was replaced by poker-table communication: Instead of saying what they wanted, Europe’s leaders engaged in  doublespeak, saying things publicly to strengthen their negotiating position in Brussels, even if those things were often at odds with their actual intent and thoughts. (Anna Sauerbrey, European Political Poker.  The New York Times, August 9, 2015) Fashionable Doublespeak [Umbro designer David] Blanch has employed an impressive amount of  doublespeak  to talk up the technological wizardry of his design. The shirts boast intelligent ventilation points, which look very much like arm holes to you and me. It incorporates tailored shoulder darts specifically designed to accommodate the biodynamics of the shoulder. Its hard to tell from the official pictures, but this ever-so-clever touch appears to be a seam. (Helen Pidd, New All-White England Kit.  The Guardian, March 29, 2009) President Harry Trumans Secretary of Semantics I have appointed a Secretary of  Semanticsa most important post. He is to furnish me with forty to fifty dollar words. Tell me how to say yes and no in the same sentence without a contradiction. He is to tell me the combination of words that will put me against inflation in San Francisco and for it in New York. He is to show me how to keep silentand say everything. You can very well see how he can save me an immense amount of worry. (President Harry S Truman, December 1947. Quoted by Paul Dickson in  Words From the White House. Walker Company, 2013) Resisting Doublespeak What can the average  receiver  do about  doublespeak  and related scams, swindles, and deceptions, and what should the average persuader/advertiser/blogger and so on do to avoid engaging in it? The  Doublespeak Homepage  recommends asking the following questions about any piece of  persuasion  being received or planned:  1. Who is speaking to whom?  2. Under what conditions?  3. Under what circumstances?  4. With what intent?  5. With what results?If you cannot answer  all  these questions with ease, or if you feel uncomfortable with the answers, or if you cannot determine any answer to them, you are probably dealing with doublespeak. You had better be prepared to delve deeper, or if you are sending the message, youd better think about cleaning it up a bit. (Charles U. Larson,  Persuasion: Reception and Responsibility, 12th ed. Wadsworth, 2010)      See Examples and Observations below.  Also  see: Pronunciation:  DUB-bel SPEK Also Known  As:  double talk ApoplanesisBureaucrateseA Dictionary of Phony PhrasesGeorge Carlins Essential DrivelGeorge Orwells Rules for WritersGibberish  and  GobbledygookLexical AmbiguityMystification  and  SkotisonSoft LanguageSoggy Sweats Whiskey SpeechUnder the Flapdoodle Tree: Doublespeak, Soft Language, and GobbledygookVaguenessWhat Are Weasel Words?Why Youll Never Be Told, Youre Fired

How convincing is Porters model of national competitive advantage in Essay - 15

How convincing is Porters model of national competitive advantage in explaining the characteristics and performance of the business systems of major economies - Essay Example For this reason, the model suggests that the nationhood of a homemade industry has a significant role in making the business venture achieve its advantage globally. The value of the nationhood to the industry is responsible for the development of the primary factors that enhances the support for the organizations in achieving the advantages available in the global completion (Pejko, 2014). Porter noted that there are four determinants of reaching the national competitive advantage. The four determinants, however, operate under the influence of the country of operation added with the competitive strengths of the firms. In this instance, Porter presents an argument that states that the competitive industries may take the form of unique clusters of the nation based firms (Rowe, 2009). Clusters have some correlations with the customers, technology, skills, the distribution channels and many more. The availability of these clusters will make the nations come up with business systems that also will lead to the competitive advantage and the realization of the economic success as a whole. An example, in this case, is the Japans automobile industry and the US semiconductor industry. The two industries have the linkage to the Porters diamond model in their operation that in this instance assists them in the creation of the unique business systems and the competitive advantages over other industries. Factor condition defines a nation’s position on the factors of production that is useful for competition through a given field of industry of operation such as the case of the skilled labour or infrastructure. Consequentially, the national factors enhance the provision of the pre advantages for the nation. As a result, each nation has a certain factor condition that, in this case, makes it favourable for the growth and the development of business systems and industries (Tallman, 2009). For instance,

Breast Cancer Lab Report Example | Topics and Well Written Essays - 750 words

Breast Cancer - Lab Report Example Acccording to studies,it is known that glycosylation is more pronounced in the breast cancer cells (Hakomori 1985). The reason for this is because of the increase in tne oligosaccharide structures (Hudis 2007).Such alterations might be identified through lectins which are the carbohydrate-binding proteins   an they have a very high specificity for the saccharides(Brooks and harris 2006).The lectins normally function as   the data mediators in the biological systems.In this case they interact with the glycoproteins glycolipids as well as the oligosaccharides(Nilsson 2007).They also bind specifically to the carbohydrate epitopes(Staffieri et al. 2012).The immunofluorescence method as well as the direct lectins cytochemistry   with the use of the   FITC-labeled lectins enables the visualization of the glycosylation’s impact on the therapies which targets the surface of the cells that bind to theHER2 receptors (Gabius 2009.The results from the histograms above (fig 1), ind icates the reason why the glycosylation’s intensity is higher in the sixth cell line when compared to that of the fifth cell line because of the different blocking agents used. In summary, further study needs to be done to clearly understand why there was a difference in the intensity of this two cell lines. It could be due to the above three mentioned reasons. Unfortunately, this study could not ascertain this.The reasons that could have resulted to the difference in the intesity could be due; firstly,the BSA could be a better blocking agent.

The Impact of Consumer Culture on the Advertisement of Oligo.Dx Assignment

The Impact of Consumer Culture on the Advertisement of Oligo.Dx - Assignment Example The representation of the body as promotional material and the connection of the same with the prevailing consumer culture of the catered customer base also is being critically evaluated. The advertisement does the extension of the product through directly noticeable images and also through critically relevant promotional text. The advertisement basically can be analyzed in two portions of which the first is the picture of a lady highlighting the cellulitis in her thighs. This image is captioned by the catchword, ‘90% of all women have cellulite’. This picture and the caption intend to cater for a broader range of customer base. This caption gives the reader a feeling that she is also included in the target group. This automatically adds to the range of the customer base. On the other side, this has an important link with the consumer culture as well. Featherstone (18-33) has opined that within a consumer culture, advertisement materials and other promotional media provides a proliferation of stylized images of the body. This has caused acute changes in the consumer culture of the society as the same has influenced their attention on both inner and outer body maintenance (Featherstone, 18-33). It should be taken into account that the advertisement of ‘Oligo. Dx’ caters to such a consumer base whose consumer culture is heavily influenced by these changes. Thus this caption along with the image contributes much towards the expansion of the consumer base. In this context, it can be well stated that the image and the caption in the advertisement successfully connect with the consumer culture and resultantly broadens the customer base for the product. In other words, these components the in the advertisement could successfully drag the reader into the customer base by utilizing the consumer culture pattern.  

Manufacturing Process of Bricks

Manufacturing Process of Bricks A brick has been a common construction material used everywhere for more than 6000 years, and has been in various shape, sizes and were made by mixing many different type of materials, each of them having their own advantage and disadvantage; and formed the basic structure and the back bone of many civilisations and was used in a wide range of buildings in centuries from building palaces, housing factories, in tunnels construction, water ways, bridges, making it the oldest manufactured building material. For centuries, the brick making process was done by hand, and involved clay being moulded and then dried in the sun until the industrial revolution when the process turned to mechanization. Today technological and mechanical advancement has helped to have a more complete knowledge of the raw material and its properties, and better control of firing, improvement in the kiln designs, all have contributed to the advancement of brick quality and has made contemporary bricks more efficien t and has improved the overall quality of the products. Today, brick is found in various materials and made in various shapes depending on the use. There are concrete brick, calcium silicate brick, clay brick and Adobe brick. See Appendix 1 This report will be looking at the technology associated with the manufacturing process of automated and traditional soil clay brick, adobe brick plain mud brick which are still use today in certain part of the globe or sometimes and slump brick- and the future of brick. PART ONE MANUFACTURING PROCESS OF AUTOMATED BRICK The first stage in the manufacturing process of the soil clay brick start with the selection of the raw material. RAW MATERIAL The main raw material in brick making is clay and it is one of the most abundant natural mineral materials on the planet. On earth, there is a wide range of clay which varies considerably in physical properties, colour, hardness and mineralogical content; making it difficult to pinpoint particular clay and say this is the best clay for brick making but they do, however, have certain properties in common. PROPERTIES and TYPES OF CLAYS Clay is complex material as individual, and their deposits is unique due to their specific modes of formation and physical characteristics, and are rarely present as pure minerals but rather are mixtures of the different clay types of one group or type normally being dominant. But the Clay entering in brick manufacturing must possess and fulfil some specific properties and characteristic such as the ability to be crushed and mixed with water to form a plastic material which can be moulded into various shapes; shrinkage or swelling percentage on firing, meaning when subject to appropriate temperatures the clay particles must fuse together; the bloating characteristics, meaning the percentage of water absorption; firing colour, meaning the colour of the brick after drying and percentage of fines produced upon crushing and fire strength and these physical properties determine their commercial value. The clays from which burnt bricks are made may be divided into three principal types, all of which have similar chemical compositions but different physical characteristics. They are: 2. A Surface Clays also called Alluvial and Drift Clays Found near the surface of the earth, may be the up thrusts of older deposits or of more recent, sedimentary formation; are readily worked and require little preparation. 2. B Shale clays or rocky clays Shale is sedimentary deposits clays that have been subjected to high pressures until they have hardened almost to the form of slate which are often difficult to work and necessitate the use of heavy machinery to extract but, may be brought into plastic condition by long weathering (i.e. by exposure to rain, frost and sun) or by crushing and grinding in water, and they then resemble ordinary alluvial clays in every respect. 2. C Fire Clays Fire clays are usually mined at deeper levels of the earth than other clays where they form the bed layer under seams of coal and have refractory qualities and a high degree of resistance to heat. MANUFACTURING PROCESS The process of making clay brick is generally uniform, although manufactures tailor their production to fit their particular raw materials. In general, the manufacturing process consists of essentially of six stages: Mining and Gathering raw materials Preparation of raw material (crushing, grinding, screening and mixing the raw materials) Making of the brick or Forming Process (forming, cutting and coating) Drying Curing ( firing and cooling) Packaging and storing Diagram of the industrial manufacturing process of clay bricks MINING and GATHERING RAW MATERIALS The choice of the mining method of clay will depend on the kind of clay, on the depth, thickness, hardness and physical geology of the clay location under the ground. The general method of extracting clay from the quarry is once or twice a year using heavy plant machinery to stock pile large amounts, so to ensure continuous brick production regardless of the weather conditions and because clays are rarely present as pure minerals but rather mixtures of the different clay types; laboratory testing of the clays from different parts of quarry will determine the characteristics of the layers and will be stock in separate different categories which will facilitate the blending of the raw materials. PREPATION OF THE RAW MATERIAL In the manufacturer, the clay rock is crashed and reduced in smaller particles, and then the material produced is screen through an inclined vibrating screening machine to control the particle sizes prior to water being added. During the screening, manufactures adjust and compensate the different variations in chemical composition and physical properties by blending clays from different locations and sources to fit their standard of the end product. Consequently, to fulfil their requirements of perfect clay for bricks making, or for the composition of the raw material to fulfil their standard, the different mixes and proportions of clay and chemical are blended together, prior to add water, as which of them affect the working properties of clays causing them to vary in their behaviour affecting the properties of the final product. At the same time, manufacture has standardized their end product and their manufacturing processes to limit variations in the processing and the inconsistency in end product. For instance, a clay brick that when cure turn white may be developed commercially because, by adding various minerals like oxide of iron will affect the propriety of the brick in such a way that when cure it will produce a red brick if also there is consistency in the manufacturing processes. Example: Clay containing from 5 to 8 % of oxide of iron will, under ordinary conditions of firing, produce a red brick; but if the clay contains 3 to 4% of alkalis, or the brick is fired too hard, the colour will be darker and purple. An excess of Alumina compound tending to make the colour lighter and brighter. FORMING OF THE BRICK The first step in forming process is to produce a homogeneous plastic clay mass work up into proper consistency by adding water to clay in a mixing chamber with one or more revolving shafts with blade extensions. After the kneading, the plastic clay mass is ready for forming. There are three different methods of shaping and forming brick: the stiff-mud process or extrusion process 6. A. The stiff-mud process or extrusion process In the stiff-mud process or extrusion process, the clay is mixed with just enough water to produce clay plastic mass with water in the range of 10 to 15 percent of the clay mass. Next, the clay is extruded through a die, producing a horizontal column of clay which passes by conveyor belt through an automatic wire cutter to create the individual brick. The cutter spaces and die size are precisely calculated to compensate for shrinkage during drying and firing. 6. B. Soft-mud process In the soft-mud process or moulded process, the clay contains too much water to be extruded. The plastic clay mass contain 20 to 30 percent of water per mass is used to produce brick either by hand or machine. In the machine driven soft-mud process, standard brick are produce in mass quantities as the machine replicate the hand-making process much quicker. 6. C. Hand making In the simplest form which is done by hand, the craftsman will produce one brick at the time by stuffing a lump of soft clay in a mould and the excess clay is stuff from the top of the mould and the brick is turned out. The mould is lubricated with either sand or water to prevent the brick from sticking in the mould. 6. D. The dry-press process In this process hydraulic or compressed air rams is used to press clay with very low plasticity, containing no more than ten percent of water by weight, into steel moulds under pressures from 500 to 1500 psi creating a very compact and dense brick. DRYING PROCESS Prior to the brick to be fired in the kiln, after the brick is formed using any of the method describes above, it containing 7 to 30 percent of moisture, depending upon the forming method. This moisture must be removed prior to the brick can be fired in the kiln otherwise, there will be formation of scum and certain mechanical defects from occurring or the brick will explode when the brick is subject to the intense heat of the kiln. This drying process which last about 18 to 40 hours, is normally done by placing the green brick in enclosed dryer which utilize excess heat supplied from the exhaust heat of kiln to maximize thermal efficiency. To ensure good result, devices are installed to measure and control humidity in the drying facilities. A. Firing After the drying, the brick are fired in furnace chamber called kiln for 10 to 40 hours, where there are subject to a temperature of ranging between 100 to 1200 degrees centigrade depending on clay type or material used and the type of finished brick required. During the process, clay particles and impurities will undergo changes as the temperature in the kilns rises. The remaining water in the brick will dry up or evaporate; unlike the metal, clay softens slowly and melts or vitrifies gradually in rising temperature. The clay molecules mass breaks down becomes soft enough to stick together; the mass becomes tight, solid and non absorbent giving the brick it texture and colour. To ensure a good product and avoid the brick to be deformed due to heat also called viscous fusion, kiln is fitted with sensors to control the temperature in the different stage the firing process. 7.A.1. What is a Kiln? In brief, kilns are just containers for heat; fuelled by natural gas, coal, sawdust, and methane gas from landfills or a combination of these fuels. There are many different types of kilns but the most common types are the continuous kilns (tunnel) which are always firing; they never cool and are capable of turning out large quantities of bricks at steady constant rate and the periodic (intermittent) kilns which are fired on an intermittent schedule. http://www.pottery-magic.com/pottery/history/bottle_kiln.htm PACKAGING Following the firing process is the packaging but prior to that the bricks are gradually cool down, for 10 hours for tunnel kiln and form 5 to 24 hours in periodic kiln, as the rate of cooling affect directly the final colour of the bricks. After the brick has cool downs, there are unload from the kiln; sorted, graded, packaged and place in a storage yard or loaded rail cars or truck of delivery. PART TWO MANUFACTURING PROCESS OF ADOBE CLAY BRICK The adobe brick, this type of earthen building materials has been around since the beginning of civilisation and has been the main building material for most of the civilisation. In our day, Adobe are mostly used in hot and dry climates and become the characteristic of the third world. Although this is a very old material, it manufacturing process hasnt change since. As with the soil clay brick the main ingredient which enter in the manufacturing process is clay and the manufacturing process start with the choice of the raw material. SELECTION OF RAW MATERIALS Adobe brick are made from a mixture of mud or clay and small pieces of straw or reeds, and are formed by hand and left in the sun to dry. The secret of make adobe bricks lays on the choice of the type of clay to use as it is made of surface clay soil. Although the bricks are made in rural area where there is no sophisticated laboratory for testing but prior using the clay it has to be tested. The testing of the clay can be done by filling 2/3 of a graded glass jar with the clay you plan to use, and then fill the jar with water and put a lid on. Shake the jar for about two minutes making sure the clay is totally mix up with the water then let the jar and the mix to sit overnight. After about 24 hours, examine the jar and its content; the clay would have broken up into two distinct bands of sand on the bottom and clay on the top. There should not be more clay than sand on the ration of 30 percent clay and 70 percent sand for an ideal adobe brick making clay. EQUIPMENT NEEDED Clay soil Measuring Tape Hammer Hand Saw 24 timbers Nails Shovel Bucket Water Straw PREPARATION OF BRICKS After selecting the clay, an area must be clear prior to start making bricks and a shed to protect the newly made against the rain as it can take a couple of days for them to dry. In the nearby, dig a hole of about 3 to 4 feet long, 2 to 3 feet wide and 2 to 3 feet deep as a mixing pit for the different ingredients. Then fill the hole with water and let it drain out as this will strengthen the wall of the hole for it not to crumble while mixing the clay soil. This will take at least a day to dry out.  Make mould of the bricks using timber. The traditional size is 4 by 10 by 14 inches and this is made with 2 by 4 studs nailed into a ladder like shape. MAKING ADOBE BRICKS Once the water in the pit has dry out, fill the pit halfway with the clay soil then add water gradually as mixing with the feet our shovel until the mix is stiff. Straw can be added to reinforce the mix but it is not necessary.Fill the mould using a shovel or hand thenlevel off the excess with the shovel or with a straight edge, makingsure there are no air pockets or gaps.  Let the bricks set and then gently remove the mould from them leaving the wet adobe bricks to dry for several days (at least three) before handling. Wash the mould and repeat the process in a different area. DRYING PROCESS Leave the adobe brick where they are while they dry in the sun for several days before turning them on the edge to completely dry out and harden and put under the shed so that the drying time can continue. When the edges turn white, they are ready to be moved, but not used. This process could take at least 3 weeks prior the brick is use. PART THREE THE FUTURE OF CLAY BRICK As the world population is growing especially in developing countries, there is a need of urbanisation to accommodate this populace meaning more bricks are needed to answer to this demand of infrastructure development. With the growing problem of energy price soaring, with the world running out of fossil fuel, with the reduction of deforestation which encourages the expansion of the desert, the clay brick industry is now facing an energy crisis and this crisis is affecting and will affect everyone. In the developed country, it is affecting the price of the accommodation and the house price while in the developing country it is leading to the impoverishment of many. This crisis resound as called for innovation by funding a new way of making new type of clay brick or improving the firing process by a new design of kiln aiming to reduce energy consumption by minimizing the energy required by the process as firing time and temperature in the kiln are the two key factors which contribute in the making of solid brick. In the developed country, electricity and fossil fuel are use as the main fuel source for brick firing as they are abundant. Founding other alternative to these sources of energy could be the way forward. But investing in nuclear power will raise an environmental issue of dealing with the nuclear waste; investing in the renewable energy will be a gamble in the way that, most of this technology are still in embryonic state and will require funding a good spot to install them and a big area to cover to be able to produce enough energy necessary to power this industries such investment will impair on the price of brick. It will mean also to divert energy which will be helpful to thousand household into industry. UNFIRED CLAY BRICK The way forward will be probably in reducing the energy consumption by designing better kiln and improving our knowledge of the minimum energy required by the process as unnecessary prolonged firing time and too high temperature will eventually consume more energy but minimum firing temperature and shortening firing time do not only reduce energy but also increase the productivity. In the developing country, this crisis reverberates as called for innovation, finding an alternative for curing clay brick as they are facing desertification. Curing is done, depending on the area, by fire wood, rice husk and maize cob or residue as main fuel sources for brick firing because they are abundant in developing country. Even though other agricultural waste such as saw dust and oil palm shell are used as substitute for wood, a new design of kiln is necessary to cope with the small size of fuel. If thinking in term of innovation in finding a new way of making clay brick, the new brick should be energy efficient in manufacturing process especial if cure through a kiln. Although the adobe clay brick may seem to be the answer but this brick however is not very strong or durable and tend to crack on drying. But one of the modern additions is to compensate this weakness by mixing soil clay with sand and stabilizing it with 4 to 8 % of cement or gypsum and then compress these materials in a given mould form, which results in strong and durable bricks, which do not crack. This is done with simple and yet innovative manually or engine-operated brick presses made from substantial steel sections with axle steel shaft with a top round shaft is case hardened carbon steel with a lid and with a bottom that moves up and down; the compression given by the machine compact the soil particles together to make dense regular shaped brick, usually 300x300x 130 mm in size and it is use  to produce interlocking soil clay bricks without burning. MANUFACTURING UNFIRED CLAY BRICKS This process uses the same type of clay use for the adobe brick. After the soil clay has been selected, it must be properly mix with Portland cement or gypsum then add water to the content so that the final product is a dry mixture containing about 15% water by weight. The dry mixture is poured in the mould of the press machine which is compress by pushing the press lever from one side to the other after closure of the top with a steel lid, with a force of about12 to 14 tons mould pressure. After the compression finish, the brick is eject from the machine and stack in the way to prevent water loss. Water is added daily so that the cement can be hydrated properly. The curing process will take about 28 days.   ADVANTAGES This Environmentally-sound building process is practical, inexpensive and  environmentallyHYPERLINK http://www.articlesfactory.com/articles/environment/soil-brick-making-machines-can-save-the-forests.html  HYPERLINK http://www.articlesfactory.com/articles/environment/soil-brick-making-machines-can-save-the-forests.htmlfriendly, as well as significant in cost savings and on-going green benefits, building with unfired soil clay bricks is one of the solution for the housing crisis because it has a lot of environmental benefits. Figure 2 The environment is protected in several ways: It lessens the ecological impact of building construction, thereby reducing deforestation and the need kiln. There is hence no need to burn the bricks, which makes this process a very low-energy requiring one. It saves money as the brick can be made On-site eliminating transportation, middlemen and breakage cost. On the other hand, unfired clay brick provide a sustainable and healthy alternative as replacement to conventional masonry materials. The structures made with soil bricks are as beautiful and durable as housing made from conventional bricks with the higher acoustical qualities that shut out exterior noise for less stressful living and reduce the need to heat or cool the interior. The soil brick is suitable especially for use in multi storey buildings, due to its durability and robustness. The bricks are already strong enough to be handled for storage when they leave the machine. Brick presses allow countryside people to build independently their own affordable bricks to self-build their houses and not have to rely on salesmen and production in towns, bad roads, transport problems and fluctuating prices. CONCLUSION The lack of fossil fuels the world will face shortly will drive the world in an economical crisis which we havent experience before driving up the price of accommodation. Though the idea of compress clay bricks from soil is far from new in the developing country, but for some unknown  reasons this technology doesnt seem to have made its brake through the developed world. There is a need to implement this new product of a low carbon footprint in the building industry. REFERENCES http://sleekfreak.ath.cx:81/3wdev/VITAHTML/SUBLEV/EN1/CLAYPROD.HTM /how_242553_.html www.ibstock.com/pdfs/technical/TIS16howbrickaremade http://www.articlesfactory.com/articles/environment/soil-brick-making-machines-can-save-the-forests.html http://www.newdawnengineering.com/website/brickandtile/tbrick/ http://opus.bath.ac.uk/16170/1/papers/Paper%2031.pdf www.bia.org/bia/technotes/t9.html REPORT: Manufacturing of Bricks 9.12.2006 Publish: The Brick Industry Association www.gobrick.com/omnisam/common/getfile.cfm?file=/bia/technotes/t9 Access 20.03.2010 Careful humidity control Publish: Vaisala news 1998 Www. Vaisala.com Access 24.03.10 ABCs of making Adobe bricks Publish: College of agriculture and home economics New Mexico state university March 2003 www.aces.nmsu.edu Access 24.03.10 Websites Mineral information institute www.mii.org 16.03.10 Bright Hub www.brighthub.com 13.03.10 University College London www.es.ucl.ac.uk 13.03.10 Answer.com/reference answer www.answer.com 17.03.2010 How to make adobe bricks www.ehow.com 17.03.2010 How to make Adobe bricks www.doityourself.com 07.04.2010